Customization: | Available |
---|---|
Material: | Metal |
Color: | Opal White |
Still deciding? Get samples of US$ 10/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Good Quality Outdoor Aluminium Garden Fence
Product details:
Alloy: |
6063 | 6061 | 6060 | 6005 | 6082 | 6463 | 7075 |
Temper : | T5 | T | T4 | ||||
Standard: | DIN | AAMA | AS | CHINAGB | |||
Certification: | ISO9001: 2008. | ||||||
Surface Finish: | Mill finish | Anodizing | Powder Coating | Wood Grain | Electrophoresis | Polished | Brushed |
Color: | Anodizing: | Silver, bronze, champagne, titanium, nickel, golden yellow, etc. | |||||
Anodizing thickness is up to 25um. | |||||||
Powder Coating: | White, black, bronze, grey, green, etc . | ||||||
Powder coating thickness is more than 60um. | |||||||
Wood Grain: | 1. Italian MENPHIS transfer printing paper. | ||||||
2. AKZO NOBEL INTERPON D1010(10 years warranty): Australia ceder, Bush cherry, Chest nut, Jarrah I, Jarrah II, Western red ceder, etc. | |||||||
3. AKZO NOBEL INTERPON D34(5 years warranty): Bush wood, Western red, Jarrah, Snow gum, etc. | |||||||
Electrophoresis: | Silver, nickel, golden yellow, black, champagne, etc | ||||||
Polishing | Silver, nickel, golden yellow, black, etc | ||||||
Brushing: | Silver, nickel, golden yellow, black, bronze, etc | ||||||
Machining: | Cutting, punching, drilling, bending, weld, mill, CNC, etc. | ||||||
OEM customized aluminium profiles are available. |
TABLE OF CHEMICAL COMPOSITION OF ALUMINUM ALLOY | |||||||||||
Alloy |
Si |
Mg |
Fe |
Cu |
Mn |
Zn |
Cr |
Ti |
Impurity |
Al |
|
Unit |
Total |
||||||||||
6063 |
0.2-0.6 |
0.45-0.9 |
< 0.35 |
< 0.1 |
< 0.1 |
< 0.1 |
< 0.1 |
< 0.1 |
< 0.05 |
< 0.15 |
Surplus |
6061 |
0.4-0.8 |
0.8-1.2 |
< 0.7 |
0.15-0.4 |
< 0.15 |
< 0.25 |
0.04-0.35 |
< 0.15 |
< 0.05 |
< 0.15 |
Surplus |
6060 |
0.3-0.6 |
0.35-0.6 |
0.1-0.3 |
≤0.1 |
≤0.1 |
≤0.15 |
≤0.05 |
< 0.1 |
< 0.05 |
< 0.15 |
Surplus |
ADODIZINMG QUALITY |
||||
Grade |
corrosion resistance |
abrasive resistance |
||
CASS test |
alkaline dropping test |
sandtrial Abrasion coefficient f,g/um |
||
hours |
grade |
|||
AA10 |
16 |
≥ 9 |
≥ 50 |
≥ 300 |
AA15 |
32 |
≥ 9 |
≥ 75 |
≥ 300 |
AA20 |
56 |
≥ 9 |
≥ 100 |
≥ 300 |
AA25 |
72 |
≥ 9 |
≥ 125 |
≥ 300 |
POWDER COATING QUALITY | |||||||
Gloss values | Thickness(um) | color variation | indentation resistance | adhesion | impact resistance | cupping test | |
Max Thickness | Min Thickness | ||||||
60 | ≤ 120 | ≥ 40 | Color should be consistent with the sample color | ≥ 80 | 0 | No cracking and shedding phenomenon after the front impact test,small fine lines around the concave is allowed | No cracking and shedding phenomenon after the cupping test ( 6mm indentation depth ) |